Description
Komatsu Specs
Not If You Own
~ This ~
Komatsu PC228USLC-3 Hydraulic Excavator
Because it has a short tail swing profile
Designed specifically for work in confined areas
By reducing tail swing
The PC228USLC-3 is perfect for work on roadways
Bridges, in urban areas
or anywhere space is limited
The PC228USLC-3 provides the performance
and productivity you expect from Komatsu equipment
Large cab
Komatsu’s low noise design incorporates a fully pressed
Highly-rigid cab that utilizes viscous cab mounting
A sliding convex door has improved cab access in confined areas
Komatsu’s large cab has improved working space
That provides more comfortable operation
Wide working ranges
Maximum digging height of the PC228USLC-3 is 7% higher
Than that of the PC200LC-8
Raising the boom on the PC228USLC-3 to a wider angle
Enhances overall working performance
Job sites that require a long upper reach
Such as demolition and slope cutting benefit
From the increased digging
And dumping ranges of the PC228USLC-3
Upper structure features
Slip resistant surfaces for improving foot traction
Improved visibility with large side-view
Sidewise, and rear mirrors added
Multi-function monitor controls
Two travel speeds
Four working modes designed
To match engine speed
Pump delivery, and system pressure
Power mode maximizes production and power
Breaker mode for optimum engine rpm
Hydraulic flow, and pressure
Economy mode for lower fuel consumption and noise
Lifting mode for high lift capacity
Easy maintenance
Long replacement interval of engine oil
Engine oil filter, and hydraulic filter
Remote mounted engine oil filter
And fuel drain valve for easy access
Equipped with the fuel pre-filter as standard
(with water separator)
Side-by-side cooling function enables
The cooling units to be attached
and detached independently
Equipped with the EMMS monitoring system
Confined space operation
The PC228USLC-3’s round form reduces
The risk of hitting objects
with the front and rear end of the machine
The Ideal Machine
For Small road occupied width
Komatsu’s PC228USLC-3 occupies
A road width of 3.99 m 13'1" or less
180 Degree Swing
With a loaded bucket
This allows the machine to work
on either side of the lane without
Interfering with traffic flow
Spec's and Details:
2004 PC228USLC-3
Serial # KMTPC057E02030771
Only 2188 Hours
6Cyl 143 Hp
Turbo Charged Diesel
28 in. Triple Grouser Tracks
14 ft. 7 in. Track Length
10 ft. 2 in. Wide
Ground to Top of Cab 9 ft. 9 in.
13,992 Lb Counter Weight
Machine Weighs 51,765 Lbs
A/C
Heater w Defroster
wipers
18 ft 8 in Mono Boom
9 ft 6 in Arm
36 in. Esco Dipper
Dig Depth of 21 ft 8 in.
Please understand I don't own this Excavator personally
I am a full time broker selling for a customer
My goal is to bring the buyer and seller together
I do my very best to tell you what I know
I encourage and very much support a pre-buy inspection
Do You Need Help Marketing Your
Equipment, Boat, Plane, Car or Truck?
Contact Me
Call Me
973-886-3020
Jay Trevorrow
jay@ironmartonline.com
Best Time to Reach Me
Monday ~ Saturday
8:00 am to 5:30 pm ~Dinner~ 9:00 pm to 12:00 pm
Sunday 12 to 10 pm
- Hours:
- 2200
- Owners:
- 1
- Under Carriage:
- 85% Plus
- Bucket:
- Esco 36 Lip 38 Cutting
- Details and Pictures:
- Scroll Down
- In need of a Zero Swing:
- Try our Custom Google Search below
