Description
IDECO H1000 RAMBLER BIR LARGE OIL WELL DRILLING RIG rebuilt to new condition
by Wagner Caterpillar of Albequerque, NM
Has not been put back into service since the rebuild was completed.
CERTIFIED DETAILED APPRAISAL FOR $5,700,000, AVAILABLE. Call for link.
CAPABLE OF DRILLING TO A DEPTH OF 12,000' SAND LINE DRUM CAPABLE OF 25,000'
1. 1/8" DRILLING LINE AND GROOVING
IDECO H-‐1000 RAMBLER BIR 800 1000 HP. WITH 7 AXLES
DRAW WORKS HAS BEEN GONE THROUGH COMPLETELY, REBUILT NEW.
DRUMSHAFT AND CATSHAFT MADE OF ASTRELOY
INSTALLED WITH NEW BEARINGS.
ROTARY DRIVE TORN DOWN AND REBUILT
NEW CLUTCH PADS AND NEW CLUTCH DRUM
INSTALLED WITH NEW SPLINED HUB.
2. NEW CATIPILLAR C-18'S 630 HP EACH
WERE INSTALLED WITH NEW 6061 TRANSMISSIONS.
RIGHT ANGLE GEAR BOXES WERE INSPECTED AND REBUILT
NEW SRR-‐28 HYDROMATIC
WAS SENT TO PARKERSBURG REBUILT NEW.
DRAWWORKS HAS ALL NEW CHAINS,
BEARINGS AND U JOINTS.
MAIN DRUM CLUTCH HAS NEW PADS
WITH NEW CLUTCH DRUM.
ALL OILER, AIR AND HYDROLIC LINES ARE NEW.
DRILLERS CONSLOLE IS NEW.
THE IDECO H-1000 UNIT
HAS ALL NEW TIRES AND WHEEL BEARINGS
FRONT AND BACK.
ALL REAR-ENDS ARE REBUILT NEW
AND ALL GEAR BOXES ARE NEW
MAST: IDECO 358,000LB HOOK LOAD QUICKLIFT
112-‐358 WITH RACKING BOARD COMPLETE WITH STAND PIPE
CROWN REBUILT NEW.
NEW MAIN CYLINDERS AND HYDRAULIC TONGS
CYLINDERS WERE ADDED TO MAST
RACKING BOARD WAS REBUILT NEW
WORK DONE BY DELTA OILFIELD TANK CO.
SUBSTRUCTURE: NEW 10' H X 10' W X 18' L
WITH 2'H X 10'W X 18'L PONY SUB, WINTERIZED, WITH STAIRS.
IT HAS REBUILT NEW HYDRAULIC BACK UP SYSTEM
AND ALL NEW FLOURESCENT LIGHTS
AND WIRING THAT MEETS ALL SPECIFICATIONS.
SUB WAS SANDBLASTED AND HAS NEW BEAMS
WORK DONE AT DELTA OILFIELD TANK CO.
WORK BY FARLEYS MACHINE SHOP
SWIVEL: NATIONAL N-‐815 WITH QUICK CHANGE
WORK DONE BURGESS RIG REPAIR
KELLY HOSE: 4" X 55' 5 1/4 HEX KELLY
BOP: USED 11" 5000# SCHAFFER DOUBLE GATE
ANNULAR: USED 11" 5000# HYDRIL ANNULAR
USED 3" X 4" 5000# CHOKE MANIFOLD
MUD TANKS (REFURBISHED):
SHALE TANK: EQUIPPED WITH 2 SWACO ALS SHAKERS
WITH TWO NEW 5" X 6" CIRCULATING PUMPS
WITH 50 HP. MOTORS,
1 –NEW 2 CONE DESANDER AND ONE POOR BOY GAS BUSTER,
1 AGITATOR, WITH ALL LIGHTING AND ELECTRICAL
AND WEDGE TYPE MUD GATES
SUCTION TANK: EQUIPPED WITH TWO NEW 5" X 6" CIRCULATING PUMPS
WITH 50 HP. ONE 10 CONE DESILTER,
THREE AGITATORS AND MIXING HOPPER.
COMPLETE WITH ALL LIGHTING AND ELECTRICAL.
NEW WEDGE TYPE MUD GATES.
MUD TANKS WERE REBUILT NEW
IN DELTA OILFIELD TANK'S SHOP.
MUD PUMPS: REBUILT NEW GARDNER DENVER PZ-‐9,
AMERICAN MADE,
IN A HOUSE WITH NEW 3508 CATIPILLAR ENGINE,
1200 RPM,
AND A NEW 5" X 6" CHARGING PUMP
WITH 50 HP ELECTIRC MOTOR.
NEW DAMPNER AND NEW VALVING RADIATOR
IS INDEPENDENTLY DRIVEN WITH ELECTRIC MOTOR.
GENERATOR HOUSE:
CONTAINS 2 NEW 3406 CATIPILLAR 410 KW GENERATORS,
ALSO TWO NEW GARDNER DENVER 30HP SCREW AIR COMPRESSORS,
1 FOUR STATION REBUILT NEW ACCUMULATOR
WITH NEW REMOTE,
1 NEW 10KW ELECTRIC HEATER,
75 KVA TRANFORMER
AND A NEW COMPLETE 480 VOLT ELECTRIC PANEL.
NEW FUEL DAYTANK AND NEW OIL BUNKER INCLUDED
WATER TANK:
10'W X 38'L X 9' H 350 BBL CAPACITY
WITH 2 NEW 2" X 3" CIRCULATING PUMPS
CONTAINS NEW ELECTRIC PANEL AND LOCKERS.
HAS ELECTRICAL CONTROLS FOR EQUIPMENT IN DOGHOUSE.
DOGHOUSE DROPS INTO WATER TANK.
HANDS CHANGE AND PARTS HOUSE:
CONTAINS LOCKERS AND SHELVING FOR PARTS.
RIG COMPLETE WITH NEW ALL LIGHTS AND ELECTRICAL
MARTIN DECKER DIAPHRAM AND INDICATOR
FUEL TANK: 8,000 GALLON WITH NEW ELECTRIC PUMPS
NEW CAT WALK:
42" H X 4' W X 52' L WITH NEW BEAVER SLIDE
COMPLETE NEW SET OF STAIRS, RAILINGS AND TARPS
RAMPS: 3 PIECE (2 ‐ 2' H X 71'L AND 1 - 9'10" W X 34'5" L)
AMERICAN MADE IN NAVASOTA, TEXAS
IN TUBOSCOPE
18,000 FEET OF NEW G-105 16.60 DRILL PIPE,
INLAID HARDBAND, INTERNALLY COATED
AND MADE-‐UP AND BROKE OUT TWICE
BY TUBOSCOPE IN HOUSTON, TEXAS (NEVER BEEN USED)
IN TUBOSCOPE
-‐ 21 NEW 6 1/2" SPIRAL DRILL COLLARS (NEVER BEEN USED)
21 4 1/2" SPIRAL WT. PIPE
6 PIPE BASKETS
3 PIPE RACKS
ALL ELECTRICAL WORK DONE WAS BY ROCKY MOUNTAIN ELECTRIC
CANVAS
USED HANDLING TOOLS
USED TONGS
USED ELEVATOR
SPARE EQUIPMENT
6061 Transmission
1 1/8" Lebus grooving
Spare drive lines and U-joints
Rebuilt new main hydraulic cylinders
Set of brake bands
Set of cables for doghouse and water combo
Both catheads that were taken off
CALL FOR APPRAISAL DOCUMENT
This drill rig is located in Colorado, USA
We make every effort to accurately represent the condition
of all items advertised and or represented.
This machine is sold on an as-is basis,
with no warranty, express or implied.
(Standard selling Practice for the industry)
For this reason, we strongly encourage and support
a prebuy inspection of any item
before you purchase it.
Please understand I don't own this IDECO H1000 RAMBLER BIR personally
I am a full time broker selling for a customer
My goal is to bring the buyer and seller together
I do my very best to tell you what I know
Do You Need Help Marketing Your
Equipment, Boat, Plane, Car or Truck?
Your Questions and Comments Welcome 24/7
Contact Jay Trevorrow
Voicemail or Text: 973-886-3020
Email: jay@ironmartonline.com
Please Leave a Detailed Email or Voicemail
- Rebuilt to Like New Condition:
- Wagner Caterpillar, ABQ, NM
- Hours Since Rebuild:
- 0 / Unused
- Extensive Work Done on All Components:
- See Below for Details
- 12,000' Drill Depth:
- 25,000' Sand Line Drum
- Mast:
- IDECO 358,000LB HOOK LOAD QUICKLIFT
- Much More More Info/Photos:
- See Below or Call for Appraisal Document
- Location:
- Colorado, USA
- Contact:
- Jay Trevorrow: 973-886-3020
